TOOL TOWN . ORG

Shipping to the lower 48 states, is included in all our prices !
What you see is what you pay !

|  Metal Working Tools |  Brass Specialty Tools |
|  Bitmoore Milling Vise |
|  Whats for Fun ? |   Home Page |


Previous Picture

Previous Picture

Next Picture

Next Picture


THIS IS THE "BITMOORE" MODEL 925
MILLING / DRILL-PRESS VISE.

THIS VISE GIVES YOU VERY QUICK TOOL POSITIONING
WITHOUT THE USE OF SHIMS !

THE JAW OPENING IS 6 INCHES & THE JAWS ARE
ADJUSTABLE FROM BOTH SIDES SO THE WORK PIECE
CAN BE CENTERED IN THE X / Y MOVEMENT.

THE UPPER TABLE HAS A THROW OF 7-1/4 INCHES, AND
THE LOWER TABLE HAS A THROW OF 6-3/4 INCHES.
THE CRANK HANDLES HAVE BEEN CALIBRATED AT 8 TURNS
PER INCH, TO MATCH THE CALIBRATION ON THE REFERENCE
SCALES WHICH CAN BE FOUND ON ALL (4) SIDES OF THE VISE.

THE (2) SMALLER HANDLES ARE TO QUICKLY ADJUST THE TENSION
ON THE X / Y HANDLES (SLIDING TABLES) THEY ALSO HAVE THUMB
SET SCREWS SO YOU CAN LOCK THEM IN PLACE.

TO RAPIDLY MOVE THE SLIDES FROM ONE SIDE TO THE OTHER YOU
JUST LOOSEN UP THE TENSION ABOUT 1/4 TURN AND THE HANDLES
WILL START FLYING !!!

THIS IS A VERY NICE VISE, ALL THE THREADS ARE "ACME"
AND THE CASTINGS ARE ALL "QUALITY" CAST IRON.

DID YOU EVER WISH YOU HAD A SMALL MILLING MACHINE
(((WHEN ALL YOU HAD WAS A DRILL-PRESS)))
WELL HERE IS YOUR CHANCE TO CURE THAT
LITTLE PROBLEM IN A HEARTBEAT !!

I REALIZE IT'S A LITTLE HARD TO TELL THE SIZE
OF THE MILLING VISE IN THE PICTURES, SO HERE
ARE A COUPLE QUICK MEASUREMENTS :

  • OVER ALL HEIGHT = 5-7/8 IN.


  • BOTTOM MOUNTING PLATE = 8-1/2 X 7 IN.


  • TOP SLIDE = 9-3/4 IN. (NOT COUNTING ANY HANDLES)


  • BOTTOM SLIDE = 8-3/4 IN. (NOT COUNTING ANY HANDLES)


  • THIS PUPPY HAS A SHIPPING WEIGHT OF ABOUT 25 Lbs.



    • THIS MILLING VISE HAS A (4) SLOT BASE THAT WILL FIT
    ON ALMOST ANY FULL-SIZE DRILL-PRESS EVER MADE.

    THE BASE BOLT PATTERN IS AS FOLLOWS .

  • ALL THE SLOTS ARE 3" LONG.


  • DOWN THE LENGTH OF (2) SLOTS IT IS 4" C.C.


  • ON EITHER END THE SLOTS ARE 5-3/4 C.C. SPACED APART.
LIST PRICE  $168.95

YOUR COST ONLY   $109.50

OUR PRICE
INCLUDES THE SHIPPING
TO YOUR DOOR-STEP IN THE LOWER 48 US STATES !





CLICK THE BUY NOW BUTTON
ABOVE TO PURCHASE.

WE MUST HAVE A PHYSICAL STREET ADDRESS
TO SHIP THIS ITEM TO. ((((NO P.O. BOXES))))
SHIPMENT IS VIA UPS GROUND.

Please take a look at our Privacy/Purchase page for more purchase information.





|  Metal Working Tools |  Brass Specialty Tools |   Bitmoore Milling Vise |

|  Whats for Fun ? |

|   EMAIL US |   Home Page |   Privacy/Purchase   |

Copyright 2003-2009 (c) ToolTown.org